| Author |
Message |
Roland Zhu
New member
Username: Roland
Post Number: 1
Registered: 04-2004
| | Posted on Wednesday, May 26, 2004 - 10:43 am: | |
Hi,
I've configured Now SMS/MMS as my MMSC, both gateway and my mobile phone are set correctly.
As I try to send MMS to other person, I found there are 2 SMS messages sent out from the gateway.
But, as I set back to my mobile operator's MMSC, and I use 2-way for sending out MMS, I found there is only 1 SMS message sent out from the gateway.
So, what is the difference with the above-mentioned, does it mean, if my company uses Now SMS/MMS as the MMSC, we will have to pay 2 SMS?! Or if there is any misconfiguration? How to shorten it to only 1 SMS?
Thanks in advance. |
Kent Williams
Moderator
Username: Kent
Post Number: 71
Registered: 10-2003
| | Posted on Wednesday, May 26, 2004 - 04:28 pm: | |
Hi Roland,
Out of curiosity, what is the mobile operator?
Normally, the MMS notifications that we have seen from operator MMSCs are always 2 SMS messages.
There are ways to tweak the notification in NowSMS to get it down to a single SMS. Please see the following discussion threads for this information:
http://www.nowsms.com/discus/messages/1/641.html
http://www.nowsms.com/discus/messages/1/417.html
--
Kent Williams
Now Wireless Support |
Roland Zhu
New member
Username: Roland
Post Number: 2
Registered: 04-2004
| | Posted on Thursday, May 27, 2004 - 03:24 am: | |
Thanks Kent! I've shorten it to 1 sms according to the instruction now. But I also notice that, when I receive a MMS notification, it is like this:
To:139xxxxxxxx
From: VASP:v (I add only one vasp user as v)
how can I get the REAL sender's phone number?
Thanks in advance! |
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce
Post Number: 2752
Registered: 10-2002
| | Posted on Tuesday, June 08, 2004 - 09:41 pm: | |
Hi Roland,
Apologies for the delay getting back to you.
Basically, you need to define a "VASP Sender Address" in the "MMSC VASP" definition.
Or, you can include a sender address in your message submission. The "VASP:xxx" text only should get inserted if there was no sender specified in the message submission, and the "VASP Sender Address" field is blank in the configuration.
-bn |
|
Search
Last
