GPRS Wavecom modem

GPRS Wavecom modem Search Search

SMS & MMS Technical Forum » NowSMS Support - MMS & Advanced Issues (Product Support Only) » Archive through July 14, 2004 » GPRS Wavecom modem « Previous || Next »
Author Message
taggat
Unregistered guest
Posted on Tuesday, February 24, 2004 - 04:10 pm:   

I have installed a wavecom M1206B-ON gprs modem, but cannot get it to connect to the vodafone mmsc to download mms messages.

when setting up the modem i put in the correct settings as i have got off other forum posts, but it still comes back with a failure when i test.

I know the sim card is gprs and mms enabled as i use it in my phone.

does anyone know where to get drivers for the wavecom for windows 2000, or any other setup that needs to be done to get it to work with NowMMS 5.0

thanks

George.
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 2050
Registered: 10-2002
Posted on Wednesday, March 10, 2004 - 02:07 am:   

Hi George,

Sorry for the delay getting back to you. But what is the error that you receive?

Do note that Wavecom has some firmware issues, so that can be a problem. See the following thread for some information on firmware issues for Wavecom GSM/GPRS modems:

http://www.nowsms.com/discus/messages/12/2052.html
ted warukirah
New member
Username: Warukirah

Post Number: 1
Registered: 04-2004
Posted on Thursday, April 22, 2004 - 12:58 pm:   

Hi,
I lost my drivers and software for my wavecom fastrack m120. could anyone know where i could download them please.
Ted
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 2385
Registered: 10-2002
Posted on Thursday, April 22, 2004 - 08:53 pm:   

Ted,

Are you referring to Windows modem drivers?

It has seemed to me that Wavecom doesn't produce any drivers specific to their modems. In the past, we have recommended that people use the "Standard" or "Generic" drivers in Windows. Usually the "19200 bps" version works best, but you can try different speeds.

-bn
Anonymous
 
Posted on Friday, May 07, 2004 - 09:54 am:   

Hi,
How can i set the bitrate to communicate with the GSM modem ? The default seems to be 57600 but i need 9600.

Thanks.
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 2539
Registered: 10-2002
Posted on Friday, May 07, 2004 - 09:14 pm:   

If you configure a Windows modem driver, the speed configured for the driver will be used.

Windows modem drivers are configured under the Windows Control Panel ... "Phone & Modem Options".

In the properties for the Modem under that definition, you can set the "Maximum Port speed" to 9600.

Then configure NowSMS to access the modem via the named modem driver instead of direct to the COM port name.

If you don't use a Windows modem driver, and configure NowSMS to talk to a COM port directly, NowSMS will try to automatically figure out the correct speed at which to talk to the modem.

-bn
Bob U'Ren
Unregistered guest
Posted on Wednesday, July 14, 2004 - 10:17 am:   

I'm having problems trying to connect to the internet with the Wavecom 1206b fasttrack. With Hyper Terminal every thing works find, I can communcate with the modem. When I try to connect to use Windows XP I get a 692 code. If I hang a Siemens MC35 I connect right up and can surf away. Do you know where I can find "drivers" or an ".inf" file that I can use for windows? With the Siemens I had to install a ".inf" before I could connect up to the net. Any help or tips would be greatly appreciated.

Thanks

Bob
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 3051
Registered: 10-2002
Posted on Wednesday, July 14, 2004 - 07:36 pm:   

Bob,

Sorry, this is the support forum for the NowSMS product, so I can only offer you very limited assistance with this.

We're not aware of any Windows modem drivers produced by Wavecom. We advise people to use the "Standard" modem drivers from Windows.

Error 692 means that Windows says that there is a hardware failure in the port. But this could just mean that the modem driver is talking to the modem at the wrong speed. Try querying the modem in the diagnostics area of phone & modem options in the control panel, and make sure that the modem is working properly there. Also, there is a log file that you can enable there, so you might want to enable that and view it to see what errors are being reported by Windows in that log file.

-bn

Login Login / Register Search Search   Home Home
Logout Logout Topics Topics Search Last 1|3|7|30 Days   Previous Page Previous Next Next Page