| Author |
Message |
Stephen Hewitt
| | Posted on Wednesday, June 04, 2003 - 11:23 am: | |
(I did post the message below but now can't find it, so apologies if this is posted twice)
We currently use Wap3GX and we had some issues with a customer where is would have been handy to be able to query the service and produce internal "alarms" when certain thresholds on the licence have been reached.
Is there a way of checking the licence usage on the service i.e. snmp/remote API?
Thanks
Stephen Hewitt
Product Manager
Opal Telecom |
Kent Williams
| | Posted on Wednesday, June 04, 2003 - 03:00 pm: | |
Hi Stephen,
Currently there is not. We are looking into some of these areas for an update later this summer. But unfortunately, I don't have anything to suggest at present.
- Kent Williams
Now Wireless Support |
Stephen Hewitt
| | Posted on Thursday, June 05, 2003 - 11:25 am: | |
Kent,
Thanks for that. I am slightly confused by the licence usage: We have call analysis that shows simultaneous calls to be about 1/3 of the number of licence usage. How does licence usage vary within a single call? It is one licence per GET request (with a timeout on the licence?)
Just need to sort it all out in my own head before committing more licence purchases...
Do you have any docs / FAQ's that address these kinds of questions?
Regards
Steve |
Kent Williams
| | Posted on Friday, June 06, 2003 - 04:57 pm: | |
Steve,
If the browser terminates the call with a WAP disconnect, then the gateway terminates the session automatically (except in WTLS mode due to some compatibility issues with some phones).
If the browser doesn't do a WAP disconnect, then the default is a timeout after 10 minutes. You can adjust the timeout by manually editing WAPGW.INI, and setting SessionTimeout=## under the [WAPGW] header, where ## is the number of minutes for an automatic timeout. I don't recommend setting that number too low as that could cause errors on some phones. 5 is a reasonable minimum.
- Kent |
Tarun Pinto Pereira
New member
Username: Tpintopereira
Post Number: 5
Registered: 09-2005
| | Posted on Wednesday, April 12, 2006 - 07:45 pm: | |
Are there any updates to the SNMP facility to send a trap on reaching license threshold.
Additionally I did not find a "SessionTimeout=##" parameter in the wapgw.ini file. Should I go ahead and add one?
Thanks. |
Tarun Pinto Pereira
New member
Username: Tpintopereira
Post Number: 8
Registered: 09-2005
| | Posted on Tuesday, May 09, 2006 - 05:09 pm: | |
Being able to monitor license usage would be of great help. It would help in determining license expansion needs.
Any ideas on how this can be done? |
Search
Last
