| Author |
Message |
Hussein Al-Mayeen
New member
Username: Mayeen
Post Number: 2
Registered: 05-2009
| | Posted on Sunday, July 26, 2009 - 02:32 pm: | |
Dears:
Kindly, I need your help in a problem I faced it in NowSMS Gateway Configuration.
Currently I have and use CDMA SMPP Gateway, it is connected with the SMSC normally without any problem.
Now I looking for NowSMS Gateway to be instead of. I set the same parameters of the previous Gateway to NowSMS Gateway,
but I always face this problem which is:
Error: ERROR: Destination flag is invalid (submit_multi)
These are parametrs of the previous sms gateway:
[SMPPParameters]
IPADDRESS=*******
PORTNUMBER=******
USERID=*******
SRCADDRESSTON=0
SRCADDRESSNPI=0
DESTADDRESSNPI=1
DESTADDRESSTON=1
DATACODING=0
PASSWORD=*******
USERTYPE=SMPP
SERVERNAME=SMS_SERVER
SENDEVENT= 0
AUTOCONNECT= 0
I wait for your feedback asap.
Thank you for your cooperation.... |
Des - NowSMS Support
Board Administrator
Username: Desosms
Post Number: 1075
Registered: 08-2008
| | Posted on Monday, July 27, 2009 - 03:15 pm: | |
Hi,
That is VERY odd.
Does this error occur when you try to connect to the SMPP server in the NowSMS configuration program? Or does this error occur when you try to send a message?
The SMSC is returning error code 0x40, which in the SMPP specification is defined as ESME_RINVDESTFLAG "Destination flag is invalid". However, this error should only occur during a submit_multi operation ... and NowSMS never uses that operation.
So basically, we're getting an error back from the SMSC that makes no sense.
It would help to know when this error occurs.
If it is happening when you send a message, do you have a "Default Sender Address" configured for the SMPP connection in NowSMS. If you do not, then please put a valid sender/source address in this field. Otherwise, if you send an SMS via the web interface, NowSMS will try to send it with a blank sender/source address, and many SMSC connections will return unexpected errors in this situation.
That would be my best guess.
--
Des
NowSMS Support |
Hussein Al-Mayeen
New member
Username: Mayeen
Post Number: 3
Registered: 05-2009
| | Posted on Monday, July 27, 2009 - 04:00 pm: | |
Hi,
Thanks for your replay..
I tried to set Default sender address with valid value,
after that i sent test message without any problem.
Thank your sir. |
|
Search
Last
