| AT Commands for Delivery Report indication |  Search
|
|
NowSMS Support Forums ⬆ MMS & SMS Technical Discussions (unsupported) ⬆ Archive through April 05, 2007 ⬆ |
◄ ► |
| Author | Message | |||
| eBank Works Team New member Username: Ebankworks Post Number: 2 Registered: 12-2006 |
Hello Sir or Madam, Our team has developed an application that will send and receive SMS via Nokia30 GSM Modem. The messages are send through PDU mode i.e AT+CMGF=0 We have initialised the paramters for the modem such as the Service Center number SCSA, the type of modem [GSM or CDMA etc] and other commands. Now when we send a PDU message using the command AT+CMGS=<pdu length><CR> <pdu message. . . ><CTRL-Z> The message is send [i.e to the service provider]and the response that we receive through the HyperTerminal software was OK +CMGS=<some index> The mobile number to which the message was send was switched ON. The message has reached the mobile. So we were supposed to receive delivery report from the other end to our newly developed application. But this did not happen. We were unable to receive the status or Delivery report. You people discuss and write whether is there any AT command to be exceuted to initialise the delivery report via HYPER TERMINAL application. If you people can indeed help my team it would be grateful for me. Hope I get the answer soon. . sir or madam. | |||
